EN
Cloud
R1BBIT · COMMUNITY

Projects

A question from the R1BBIT community

Projects·R1BBITadmin·· edited

Waveshare ESP32-S3 RLCD 4.2-inch — VIDEO with Sound

This project demonstrates how easy it is to play video with sound on the Waveshare ESP32-S3 RLCD 4.2-inch display using R1BBIT.
Video
The device features a 400×300 reflective ST7305 display and an integrated ES8311 audio codec with speaker support. With R1BBIT, video and audio playback can be started with just a few lines of R1BASIC code.

The video is loaded directly from the R1BBIT server, eliminating the need to manually manage complex video decoding, display, and audio libraries.
Waveshare ESP32-S3 RLCD 4.2-inch — VIDEO with Sound

This project shows how R1BBIT makes advanced multimedia features on ESP32 simple and accessible — no C/C++ programming or complex development environment required.

R1 BASIC
CONFIG
// ── Display: reflective 4.2" ST7305, 400x300 ──
DISPLAY_DRIVER ST7305
SPI_MOSI 12
SPI_CLK  11
SPI_FREQ 20000000
DISPLAY_CS  40
DISPLAY_DC  5
DISPLAY_RST 41
DISPLAY_W 400
DISPLAY_H 300
// ── I2C0: ES8311 0x18, ES7210 0x40, PCF85063 0x51, SHTC3 0x70 ──
I2C_SDA 13
I2C_SCL 14
I2C_FREQ 400000
// ── Audio: ES8311 codec, speaker through built-in amplifier ──
CODEC ES8311
CODEC_ADDR 0x18
CODEC_PA_PIN 46
AUDIO_OUT CODEC
AUDIO_IN  CODEC
I2S_MCLK 16
I2S_BCLK 9
I2S_WS   45
I2S_DOUT 8
I2S_DIN  10
I2S_FREQ 16000
CODEC_PA_ACTIVE_LOW 0
END_CONFIG
// Initialize the display
DISPLAY_INIT
VIDEO_PLAY("@TOM",0,0,400,300,20) //Plays a previously uploaded video file from the R1BBIT server
AUDIO_VOLUME(80)
WHILE 1
    PAUSE 1000
WEND                   
// End of infinite loop

Upload and run the program on the device.

1
0 replies

Sign in to reply