27
Editor: the tool gallery now covers fonts too
We've added font work to the web editor: upload a TTF, pick the character ranges you need, and touch up a glyph pixel by pixel if you have to. At the bottom…
R1BBIT · COMMUNITY
समुदाय
Questions, answers and finished builds from people using R1BBIT.
1
R1BBIT desk case for a 4.0" ST7796 display + ESP32-S3, with stand
Desk case for a 4.0" SPI display ST7796 480×320 (LCDwiki MSP40xx class, capacitive touch) and an ESP32 S3 DevKitC. Case 128 × 76 × 33 mm. The window is centred and 0.8…
1
Test: ESP32 enclosure 60×40 with mounting posts
Test post for the new 3D models section. A simple enclosure for an ESP32 dev board: 2 mm walls, a 2 mm base and two 5×5 mm posts for M2 screws. A…
9
Which display for a C3 if all I need is text
I need three lines of digits, nothing else. I'm looking at an SSD1306 128×64 over I²C — will it definitely come up on a C3? Or should I just take a TFT…
6
Coming from the Arduino IDE — what is fundamentally different here?
I've been writing sketches for five years. I'm trying to work out what I gain besides not having to compile. Could someone put it in a couple of sentences?
14
DS1820 returns 85 every other read — what am I doing wrong?
Two sensors on one bus, polled every 1000 ms: Every second reading is exactly 85.0. The wire is short and the 4.7k pull up is in place.
31
Greenhouse on a P4: a chart on the panel and a push to the phone
Finally finished it. An ESP32 P4 with a ten inch panel, an SI7021 inside, a DS18B20 in the soil. The whole thing is 40 lines: VARS PUBLISH sends the readings to the…