- Connect two 16×16 WS2812 RGB LED matrices together and connect them to the 1-WIRE output and an external power supply.
- Convert the R1BBIT logo into a 15×16 pixel format using the built-in editor.
- Write a small piece of code to animate the logo.
- Write a small piece of code to display SCD41 sensor readings as scrolling text.
// Size: 15x16, Format: RGB565 (16bpp), 480 bytes -> RLE: 301 bytes (-37%)
CONST IMG RLE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END_CONST
VAR I,CO2,T,H,F,COL,Y,H2
SCD41_INIT(CO2,T,H, 1000)
MATRIX_INIT(16,16,"V","BL","RR")
MATRIX_FILL(0x0000)
